Operation Manual

HEIDENHAIN CNC PILOT 4290 563
6.19 Example
Defining the workpiece blank
U Select “Workpiece > Blank > Bar.” TURN PLUS opens the “Bar”
dialog box.
U Inputs:
 Diameter = 60 mm
 Length = 80 mm
 Oversize = 2 mm
U TURN PLUS displays the workpiece blank.
U Press the ESC key to return to the main menu.
Defining the basic contour
U Select “Workpiece > Finished part (> Contour).”
U “Point” dialog box (starting point of contour):
 Enter X = 0; Z = 0
U Enter X = 16
U Enter Z = –25
U Enter X = 35
U Enter Z = –43
U Enter X = 58; W = 70
U Enter Z = –76
U Press the ESC key to go back one menu level.
U Press the ESC key. TURN PLUS asks whether you
want to close the contour.
U Press “Yes.” TURN PLUS creates the basic contour.