Operation Manual

HEIDENHAIN CNC PILOT 4290 617
8.1 Tool Database
Additional information:
 Dialog box 3: see “Multipoint tools, tool life monitoring” on
page 620
 see “Explanation of tool data” on page 622
 see “Tool holder, tool mount” on page 624
Parameters in dialog box 2 G S TP
T hold. DIN: Type of tool holder – • –
T hold. heig. (wh): Height of tool holder – • –
T hold. brea. (wb): Width of tool holder – • –
Chck.di. (fd): Diameter of chuck – • –
Chck.he. (fh): Height of chuck – • –
Sali.lg.(ax): Salient length – • –
Pitch (hb): Thread pitch • – •
Fit qual(ity): H6, H7, H8, H9, H10, H11, H12 or
H13
––•
Available: Physical availability – – •
Picture no. –•–
Cutting material ––•
CSP comp.: Compensation factor for cutting
speed
––•
FDR comp.: Compensation factor for feed rate – – •
Depth comp.: Compensation factor for cutting
depth
––•
Mount type •–•
 The tool selection function of TURN PLUS only checks
whether the fit quality is defined/undefined. It does not
perform a detailed evaluation.
 Chuck
 Holders F, K: “fd, fh” define the holder dimensions.
 Other holders: Where fd=0/fh=0, no chuck is
displayed.