Operation Manual

HEIDENHAIN CNC PILOT 4290 619
8.1 Tool Database
Additional information:
 Dialog box 3: see “Multipoint tools, tool life monitoring” on
page 620
 see “Explanation of tool data” on page 622
 see “Tool holder, tool mount” on page 624
Parameters in dialog box 2 G S TP
T hold. DIN: Type of tool holder – • –
T hold. heig. (wh): Height of tool holder – • –
T hold. brea. (wb): Width of tool holder – • –
Chck.di. (fd): Diameter of chuck – • –
Chck.he. (fh): Height of chuck – • –
Sali.lg.(ax): Salient length – • –
Pitch (hf): Thread pitch • – –
Threads per unit length (gb) for multiple threads – – –
Tooth type:
 0: Undefined
 1: Front face, straight
 2: Front face, inclined
 3: Lateral surface, straight
 4: Lateral surface, inclined
 5: Front face and lateral surface, straight
 6: Front face and lateral surface, inclined
 7: Special tooth type
––•
Available: Physical availability – – •
Picture no. –•–
Cutting material ––•
CSP comp.: Compensation factor for cutting
speed
––•
FDR comp.: Compensation factor for feed rate – – •
Depth comp.: Compensation factor for cutting
depth
––•
Mount type •–•
Chuck: Where fd=0/fh=0, no chuck is displayed.