Operation Manual
664
10.1 The Transfer Mode of Operation
Call the Security window:
U Press CTRL+ALT+DEL. Windows opens the Security window.
U Use Log-off to log the current Windows user off.
U Log on with another Windows user name (with network
configuration privileges, for example).
If you have to restart the operating system after changing operating-
system settings, for example, you should shut down the system and
switch off the control before restarting.
User logon: You can only configure the network if you are logged on
with the correct Windows user group. You log on in the required user
group by entering the corresponding password. The meaning of the
Windows passwords is different from the meaning of the passwords
for control functions.
HEIDENHAIN has already installed the following users:
In the factory default setting, the Windows user group "CNCUser" is
entered as a workgroup.
You will find general information on the Windows user groups in the
Windows online help.
As soon as you have activated Windows, the control
screen is hidden. HEIDENHAIN therefore recommends
that you do not activate Windows when automatic
mode is active.
Do not use the automatic restart in Windows.
User name User group Password Description
CNCUser Users – User for control
operation
CNCExpert Network
Configuration
Operator
SYS095148 User for network
configuration
CNCAdmin Administrators SYS039428 Administrator