Operation Manual

HEIDENHAIN CNC PILOT 4290 667
10.1 The Transfer Mode of Operation
Configure “printer”
U Log in as “System Manager”
U Select “Setting > Printer” in the Transfer mode. The CNC PILOT
opens the “Printer setting” dialog box.
U Enter “FILE” in the “Device name” field. The other parameters
have no effect.
The printout is prepared and output to a file named “PRINT_xx.txt”
(xx: 00 to 19) in the “Data” directory. Maximum file size: 1 MB
For DataPilot, you can also use the “STD” entry for the Windows
standard printer.
The parameters of the serial interface are saved in one of
the control parameters 41 to 47 (depending on the setting
in control parameter 40).