Operation Manual

HEIDENHAIN CNC PILOT 4290 695
11.2 Pin Layouts and Connecting Cables for the Data Interfaces
When using the 9-pin adapter block:
Non-HEIDENHAIN devices
The connector layout of a non-HEIDENHAIN device may substantially
differ from the connector assignment of a HEIDENHAIN device.
It depends on the unit and the type of data transfer. The table below
shows the connector pin layout on the adapter block.
CNC PILOT Connecting cable ID 355 484-xx
Adapter block
363 987-02
Connecting cable ID 366 964-xx
Pin Assignment Socket Color Pin Socket Pin Socket Color Socket
1 Do not assign 1 Red 1 1 1 1 Red 1
2RXD 2Yellow 2222Yellow 3
3TXD 3White 3333White 2
4 DTR 4 Brown 4 4 4 4 Brown 6
5Signal GND5Black 5555Black 5
6DSR 6Violet 6666Violet 4
7RTS 7Gray 7777Gray 8
8 CTR 8 White/Green 8 8 8 8 White/Green 7
9 Do not assign 9 Green 9 9 9 9 Green 9
Hsg. Ext. shield Hsg. Ext. shield Hsg. Hsg. Hsg. Hsg. Ext. shield Hsg.
Adapter block 363 987-
02
Connecting cable ID 366 964-xx
Socket Pin Socket Color Socket
111Red 1
222Yellow3
333White 2
444Brown6
5 5 5 Black 5
666Violet 4
777Gray 8
8 8 8 White/Green 7
999Green 9
Hsg. Hsg. Hsg. Ext. shield Hsg.