Operation Manual

718
Overview of G Commands in the MACHINING Section
Overview of G Commands in the
MACHINING Section
G commands for turning
Turning—Basic functions Turning—Basic functions
Tool positioning without machining Zero point shifts
G0 Positioning in rapid traverse Page 187 G53 Parameter-dependent zero point shift Page 199
G14 Move to the tool change position Page 187 G54 Parameter-dependent zero point shift Page 199
G701 Rapid traverse to machine coordinates Page 187 G55 Parameter-dependent zero point shift Page 199
Simple linear and circular movements G56 Additive zero point shift Page 200
G1 Linear movement Page 189 G59 Absolute zero point shift Page 201
G2 Circular arc with incremental center
dimensioning
Page 190 G121 Contour mirroring/shifting Page 202
G3 Circular arc with incremental center
dimensioning
Page 190 G152 Zero point shift, C axis Page 254
G12 Circular arc with absolute center
dimensioning
Page 191 G920 Deactivate zero point shift Page 308
G13 Circular arc with absolute center
dimensioning
Page 191 G921 Deactivate zero point shift, tool
dimensions
Page 308
Feed rate and spindle speed G980 Activate zero point shift Page 309
Gx26 Speed limit * Page 192 G981 Activate zero point shift, tool
dimensions
Page 310
G48 Acceleration (slope) Page 192
Oversizes
G64 Interrupted feed Page 193 G50 Switch off oversize Page 204
G192 Feed per minute for rotary axis Page 193 G52 Switch off oversize Page 204
Gx93 Feed per tooth * Page 194 G57 Paraxial oversize Page 204
G94 Feed per minute Page 194 G58 Contour-parallel oversize Page 205
Gx95 Feed per revolution Page 194
Safety clearances
Gx96 Constant surface speed Page 195 G47 Set safety clearances Page 206
Gx97 Shaft speed Page 195 G147 Safety clearance (milling) Page 206
G922 Shaft speed with V constant Page 311