Operation Manual

HEIDENHAIN CNC PILOT 4290 723
Overview of G Commands in the MACHINING Section
B-axis and Y-axis machining
Y-axis machining Y-axis machining
Working planes Milling cycles
G16 Tilting the working plane G841 Area milling - roughing
G17 XY plane (front or rear face) G842 Area milling - finishing
G18 XZ plane (turning) G843 Centric polygon - roughing
G19 YZ plane (side view/lateral surface) G844 Centric polygon - finishing
Tool positioning without machining G845 Pocket milling, roughing
G0 Positioning in rapid traverse G846 Pocket milling, finishing
G14 Move to the tool change position G800 Thread milling in XY plane
G701 Rapid traverse to machine coordinates G806 Thread milling in YZ plane
G714 Insert magazine tool G803 Engraving in XY plane
G712 Define tool position G804 Engraving in YZ plane
G600 Tool pre-selection G808 Hobbing
Simple linear and circular movements
G1 Linear path
G2 Circular arc with incremental center
dimensioning
G3 Circular arc with incremental center
dimensioning
G12 Circular arc with absolute center
dimensioning
G13 Circular arc with absolute center
dimensioning