Operation Manual

344 Teach-in-modus
4.8 Freescycli
Looprichting van de frees bij contourfrezen
Looprichting van de frees bij contourfrezen
Cyclustype Looprichting v.d. frees Rotatierichting GS FRC Uitvoering
binnen (JK=1) tegenlopend (H=0) Mx03 rechts
binnen tegenlopend (H=0) Mx04 links
binnen meelopend (H=1) Mx03 links
binnen meelopend (H=1) Mx04 rechts
buiten (JK=2) tegenlopend (H=0) Mx03 rechts
buiten tegenlopend (H=0) Mx04 links
buiten meelopend (H=1) Mx03 links
buiten meelopend (H=1) Mx04 rechts
rechts (JK=2) Bij open contouren zonder
functie. Bewerking in
contourdefinitierichting
zonder functie rechts
links (JK=1) Bij open contouren zonder
functie. Bewerking in
contourdefinitierichting
zonder functie links