Operation Manual

10
4.6 Thread and Undercut Cycles ..... 162
Thread cycle (longitudinal) ..... 165
Thread cycle (longitudinal)—Expanded ..... 166
Tapered thread ..... 168
API thread ..... 170
Recut (longitudinal) thread ..... 172
Recut (longitudinal) thread—Expanded ..... 174
Recut tapered thread ..... 176
Recut API thread ..... 178
Undercut DIN 76 ..... 180
Undercut DIN 509 E ..... 182
Undercut DIN 509 F ..... 184
Examples of thread and undercut cycles ..... 186
4.7 Drilling Cycles ..... 190
Drilling, axial/radial ..... 191
Deep-hole drilling, axial/radial ..... 193
Tapping, axial/radial ..... 195
Thread milling, axial ..... 197
Examples of drilling cycles ..... 199
4.8 Milling Cycles ..... 201
Rapid traverse positioning ..... 202
Slot, axial ..... 203
Figure, axial ..... 204
ICP contour, axial ..... 208
Face milling ..... 211
Slot, radial ..... 215
Figure, radial ..... 216
ICP contour, radial ..... 220
Helical-slot milling, radial ..... 223
Cutting direction for contour milling and pocket milling ..... 224
Examples of milling cycles ..... 226
4.9 Drilling/Milling Patterns ..... 227
Drilling/milling pattern linear, axial ..... 228
Drilling/milling pattern circular, axial ..... 230
Drilling/milling pattern linear, radial ..... 232
Drilling/milling pattern circular, radial ..... 234
Examples of pattern machining ..... 236
4.10 DIN Cycles ..... 239