Operation Manual

HEIDENHAIN MANUALplus 4110 519
9.7 DIN Programming Example "Milling Cycle"
9.7 DIN Programming Example
"Milling Cycle"
This example illustrates how to machine the face using the DIN
programming feature.
Required tool
 Milling tool (roughing and finishing):
 Position T40
 WO = 8 Tool orientation
 I = 8 Cutter diameter
 K = 4 Number of teeth
 TF = 0.025 Feed per tooth
Preconditions:
 The turning operation is completed.
 The tool dimensions have been determined.