Operation Manual

528 10 Tables and Overviews

10.3 Technical Information

Specifications

Control design  Contouring control with integrated motor control

 2 controlled axes X/Z, controlled spindle and 1 driven tool

Display  Integrated 10.4-inch TFT color flat-panel display

 Highlighted actual-value and status displays

 Load display for spindle

 Error messages in plain language

Program memory  Hard disk > 4.5 GB

Input resolution and display step  X axis: 0.5 µm, diameter: 1 µm

 Z axis: 1 µm

 C axis: 0.001°

Interpolation  Straight line in 3 principal axes (max. ±10 m)

 Circle in 2 axes (max. ±100 m)

Feed rate  Max. 9.999 m/min or max. 9.999 mm/rev.

 Constant cutting speed

 Maximum threading feed rate up to 99.999 m/rev.

 Feed rate with chip breaking

 Maximum rate of rapid traverse 99.999 m/min

Spindle  0 to 9 999 rpm

Axis control  Integrated digital drive control for synchronous and

asynchronous motors

 Position control clock pulse: < 3 ms

 Speed control: < 0.6 ms

 Current control: < 0.1 ms

Spindle speed  Speed: 0 to 9999 rpm

Error compensation  Backlash / reversal error

 Screw pitch error

 Slope angle of an oblique axis

 Temperature

Integral PLC  512 KB program memory

 124 KB data memory

Data interface  RS 232-C, max. 38.4 kilobaud

 RS 422-C, max. 38.4 kilobaud

 Ethernet 10 Mb

Operating temperature  0 °C to 45 °C