Operation Manual

HEIDENHAIN MANUALplus 4110 97
4.3 Single Cut Cycles
M functions
Machine commands (M functions) are not executed until Cycle START
has been pressed. For the meaning of the M functions, refer to your
machine manual (see “M Functions” on page 408).
Call the single-cut menu.
Select "M function."
Enter the number of the M function.
Conclude entry.
Press Cycle START.
Call the single-cut menu.
Select "M function."
Switch M19 on.
Enter the stopping angle.
Conclude entry.
Press Cycle START.
M function
Spindle stop M19 (spindle positioning)