Operation Manual

HEIDENHAIN MANUALplus 620 133
4.3 Single cut cycles
Rapid traverse positioning
Call the single-cut menu
Select rapid traverse positioning
The tool moves at rapid traverse from the starting point to the target
point.
Cycle parameters
X, Z Starting point
X2, Z2 Target point
T Turret pocket number
ID Tool ID number
MT M after T: M function that is executed after the tool call T
MFS M at beginning: M function that is executed at the
beginning of the machining step
MFE M at end: M function that is executed at the end of the
machining step
WP Displays which workpiece spindle is used to process the
cycle (machine-dependent)
 Main drive
 Opposing spindle for rear-face machining
BW Angle in the B axis (machine-dependent function)
If more axes are available on your machine, additional
input parameters will be displayed.