Operation Manual

HEIDENHAIN MANUALplus 620 151
4.4 Turning cycles
Cut, transverse
Select cut, longitudinal/transverse
Select cut transverse
The cycle roughs the rectangle described by the starting point and
contour starting point Z1/contour end point X2.
Cycle parameters
X, Z Starting point
Z1 Contour starting point
X2 Contour end point
P Infeed depth: Maximum infeed depth
H Contour smoothing
 0: With every cut
 1: With the last cut
 2: No finishing cut
G47 Safety clearance (see page 128)
G14 Tool change point (see page 128)
T Turret pocket number
ID Tool ID number
S Spindle speed/cutting speed
F Feed per revolution
MT M after T: M function that is executed after the tool call T