Operation Manual

HEIDENHAIN MANUALplus 620 417
5.12 Face contours in smart.Turn
Linear slot on face
You can find the reference dimension ZR with the "select reference
plane" function (see page 411).
ICP generates:
 The FRONT section code with the reference dimension parameter.
In nested contours, ICP generates only one section code.
 A G308 with the parameters contour name and milling depth.
 A G301 with the parameters of the figure.
 A G309.
Circular slot on face
You can find the reference dimension ZR with the "select reference
plane" function (see page 411).
ICP generates:
 The FRONT section code with the reference dimension parameter.
In nested contours, ICP generates only one section code.
 A G308 with the parameters contour name and milling depth.
 A G302 or G303 with the parameters of the figure.
 A G309.
Reference data of face
ID Contour name
PT Milling depth
ZR Reference dimension
Parameters of figure
XKM, YKM Center of figure (Cartesian coordinates)
A Position angle (reference: XK axis)
K Length
BWidth
Reference data of face
ID Contour name
PT Milling depth
ZR Reference dimension
Parameters of figure
XKM, YKM Center of figure (Cartesian coordinates)
A Starting angle (reference: XK axis)
W Position angle (reference: XK axis)
R Curvature radius (reference: center point path of the
slot)
Q2 Direction of rotation
 CW
 CCW
BWidth