Operation Manual

458 ICP programming
5.15 Contours in the YZ plane
Linear slot in YZ plane
You can find the reference diameter XR with the "select reference
plane" function (see page 411).
ICP generates:
 The section code SURFACE_Y with the reference diameter and
spindle angle. The section code is omitted for nested contours.
 A G308 with the parameters contour name and milling depth.
 A G381 with the parameters of the figure.
 A G309.
Circular slot in YZ plane
You can find the reference diameter XR with the "select reference
plane" function (see page 411).
ICP generates:
 The section code SURFACE_Y with the reference diameter and
spindle angle. The section code is omitted for nested contours.
 A G308 with the parameters contour name and milling depth.
 A G382 or G383 with the parameters of the figure.
 A G309.
Reference data in YZ plane
ID Contour name
PT Milling depth
C Spindle angle
XR Reference diameter
Parameters of figure
YM, ZM Figure center
A Position angle (reference: X axis)
K Length
BWidth
Reference data in YZ plane
ID Contour name
PT Milling depth
C Spindle angle
XR Reference diameter
Parameters of figure
YM, ZM Figure center
A Starting angle (reference: X axis)
W End angle (reference: X axis)
R Curvature radius (reference: center point path of the
slot)
Q2 Direction of rotation
 CW
 CCW
BWidth