Operation Manual

Image 4
8
English
INSERTING THE ACCESSORIES
HEIDER PRO5 PMR 446
CHARGING THE BATTERY
If the battery has not been used before or the bat-
tery is down, the battery can be charged by con-
necting to the EXT DC socket of the charging de-
vice as shown in the image. If DC power of 12~16
volts is available, optional DC adaptor can be used
by inserting into the lighter input to charge the
battery. The charging level will be shown on the
screen while the battery is being charged and TX/
BUSYindicatorwillglowinredcolor(see image 4).
When the charging is completed, TX indicator will
glow in green color.
WARNING!
• Usethechargingdeviceonlytochargetheradiobattery.
• The charging device may cause sounds in theTV and radio signals.Therefore, do not
charge the battery near such devices.
• Chargethebatteryinplaceswiththetemperatureof41°F-95°F(+5°C-+35°C).Theplaces
excluding the range of this temperature may cause damage on the battery.
• Ifthebatteryisnotchargedwithinafewhours,thereisaproblemwithit.Incaseofsuch
situations, do not continue charging the battery and contact us.
• Removethebatteryifyouwillnotuseitforalongtime.Otherwise,thebatterycanleak
down and your radio can be damaged.
• Thebatterywillberunoutofwhennotusedforalongtimeanditshouldbechargedup
to half once in every six months.