Owner manual

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999223 / 08/07/2009
page 20 of 34
5 Assembling the condenser (accessory)
➨ Unscrew the hose nozzle at the outlet of the pump using
an open-ended wrench.
➨ Unscrew cover.
➨ Unscrew both square nuts at the mounting angle and re-
move screws.
➨ Feed the two square nuts into the groove at the upper side
of the housing cover.
➨ Assemble cover.