Product Manual

ManualsBrandsHein-Werner Automotive ManualsAutomotiveHigh-Reach 10-Ton Jack Stands — Pair

Heavy Duty Jack Stands

HW93511-M0 rev 02242010

Operating Instructions & Parts Manual

Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

SFA Companies

10939 N. Pomona Ave, Kansas City, MO 64153

customerservices@heinwerner-automotive.com

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

! ADVERTENCIA

• Leer, comprender, y seguir las instrucciónes antes

de utilizar el aparato.

• El manual de instrucciónes y la información de

seguridad deben estar comunicado en lengua del

operador antes del uso.

• No seguir estas indicaciónes puede causar daños

personales o materiales.

Model Number Capacity per pair

HW93511 10 Ton

Made in the

U.S.A.

Model Number Capacity per pair

HW93512 10 Ton

! WARNING

• Read, understand and follow all instructions

provided with and on this device before using.

• Failure to heed these warnings may result in

personal injury and/or property damage.

Summary of content (4 pages)

PAGE 1
Made in the U.S.A. Heavy Duty Jack Stands Operating Instructions & Parts Manual Model Number HW93512 Model Number HW93511 ! Capacity per pair 10 Ton Capacity per pair 10 Ton This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. ! advertencia • Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.
PAGE 2
SAFETY AND GENERAL INFORMATION Save these instructions. For your safety read, understand, and follow the information provided with and on this pair of jack stands before using. The owner and operator of this equipment shall have an understanding of the jack stands and safe operating procedures before attempting to use. The owner and operator shall be aware that use of this product may require special skills and knowledge.
PAGE 3
! WARNING ! • Rated capacity is PER PAIR! DO NOT exceed rated capacity. 1. Change Saddle height by adjusting the Extension Tube, then insert the Support Pin through both Adjustment Holes in Extension Tube. 2. Check that Support Pin is securely seated across cutouts in top of Collar before loading. Ensure that Support Pin is inserted completely so that bar stop engages the collar. 3. Carefully position jack stands so that load will be centered on stand’s saddle. 4. Slowly lower the vehicle onto stands. 5.
PAGE 4
HW93511 REPLACEMENT PARTS 1 ITEM PART NO DESCRIPTION QTY 1 928254 SUPPORT PIN AND LANYARD 1 2 928253 CASTER 2 3 928256 HARDWARE KIT* 1 *Includes hardware for both casters and securing fasteners.