Hydraulic Transmission Jack Operating Instructions & Parts Manual Model Number HW93718 Capacity 1 Ton Made in the U.S.A. ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 customerservices@heinwerner-automotive.com Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge.
ASSEMBLY Wedges: Align the hole in the wedge with the hole in the saddle assembly. Secure with the nut, washer, and bolt. Repeat for the other three wedges. Chain: Insert the bolt through one hole of the saddle assembly (lowest to the ground) if accessible. If the assembly is extended, insert the bolt through one hole of the adjustment plate. Secure with washer and wingnut. BEFORE USE 1.
MAINTENANCE Important: Use only a good grade hydraulic jack oil. Avoid mixing different types of fluid and never use brake fluid, turbine oil, transmission fluid, motor oil, or glycerin. Improper fluid can cause failure of the jack and the potential for sudden and immediate loss of load. We recommend Hein-Werner HW93291 or equivalent hydraulic jack oil.
TWO YEARS LIMITED WARRANTY For a period of two (2) years from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas city, MO 64153.
Model HW93718 Replacement Parts (Frame) Figure 2 - Parts Illustration for Model HW93718 (Frame) Item 1* 2* 3* 4* 5* 6* 7* 8* 9* 10* 11 12 13 14 15 16 17 18 19 20 21 Part# N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A H6662100 H2205500 221798 H2213500 H2205000 H1896000 H6597900 H6599700 H5579600 221798 H2215500 Description Qty Adj. Angle Assembly 2 Adj. Stud Bracket 2 Washer 6 Hex Hd. Cap Screw 6 Yoke Clamp 2 Washer 4 Hex Nut 4 Adj. Yoke Rod 2 Adj.
20 21 22 212227* 233977 234005 Release Valve Knob Release Stem Ass'y 1 1 1 41 42 43 44 * Denotes Parts in Repair Kit No. 245892 245546 210311 245892 261169 Socket Bracket Pipe Plug Repair Kit Hyd. Unit w/o Hdl. 1 1 - Model HW93718 Replacement Parts (Hydraulic Unit) Suction/Discharg e Valve Release Valve Overload Valve (Set To 2000 lbs.
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 816-891-6390 customerservices@heinwerner-automotive.
