Installation Guide

ManualsBrandsHeirloom Home Products ManualsBathroomS-1615RH Black Corner Shower Kit with Pre-Cut 2-in Drain

Shower & Bath Enclosure

Installation Instructions

Thank you for purchasing Heirloom Home Showers’ products. We are committed to providing our customers with high

quality products at a competitive price.

Please read all instructions carefully before and during installation.

Professional help is required for installation.

These installation instructions should be used

as a guideline. Your specific

shower or bath enclosure may

differ from the figures shown in

these instructions. This

instruction is for shower models as

follows: S-1615, SE-1615, and

1615

The shower is delivered in a wood crate with carton box contents as follows:

Box 1: one big and one small front glass panels (the panels have aluminum frames), and one big and one

small glass doors (doors don’t have Al frames)

Box 2: function panel with pressure balance valve, water hoses, body jets, and electronic control box

Box 3: one big and one small back wall panels (the panels have Al frames)

Box 4: shower base and top, door tracks tucked under the base, and a hardware box of size 23”X10”X4”

Summary of content (10 pages)

PAGE 1
Shower & Bath Enclosure Installation Instructions Thank you for purchasing Heirloom Home Showers’ products. We are committed to providing our customers with high quality products at a competitive price. Please read all instructions carefully before and during installation. Professional help is required for installation. These installation instructions should be used as a guideline. Your specific shower or bath enclosure may differ from the figures shown in these instructions.
PAGE 2
Hardware included: 1. Drain with flexible hose if you ordered 1-1/2” drain. It doesn’t come with a drain piece or flexible hose if you ordered 2” drain. You can buy 2” drain at a hardware store. 2. 10 cup washers and decorative chrome covers for mounting the function panel to back walls 3. 7/8” iron screws (8pieces), ½” stainless steel screws (20 pieces), and 1/4" (4 pieces) long screws 4. Glass shelf and its mounting bolts, washers, and nuts 5.
PAGE 3
. Front Frame Assembly a. Connect curved tracks to the vertical stiles (#37)(wider stiles at the ends of the front tinted (or clear) panels) with two metal screws(#27) as shown by the illustration. b. The wider track(#26) is on top. Make sure the U-shaped channel of this track OPENS upwards. c. The narrower track is on the bottom. Make sure that U-shaped channel of this track OPENS downwards. d. Use 8 iron screws (#27)of 7/8” and magnetically tipped screw bit.
PAGE 4
. Second Points of Attachment of Front Panels to the Tracks Attach the smaller vertical stiles of the front panels to both the top and bottom tracks. From inside and in the middle (#24) of the track, use 3/16” drill bit to drill through both layers of the track and first layer of the small stile. Use 3/8” drill bit to drill through the first layer of the track (inside layer). Use ¼” screw to attach both top and bottom tracks to the small stiles. Repeat the same procedure for the other front panel.
PAGE 5
. Glass Door Assembly a. Two types of door rollers are provided: top rollers with threaded shaft for height adjustable, and bottom rollers with spring loaded push-in mechanism. b. Locate handle holes on the doors and install water seal strips with magnets (dark brown or white) on the edges near the door handles and clear strips (4) to the other edges as shown by the illustration.
PAGE 6
. Back wall Assembly a. Install glass shelf, hand-held sliding bar or mounting bracket, towel bar if applicable, soap/shampoo dispensers, mirror, through-wall elbows to back walls through pre-drilled holes. b.
PAGE 7
Hand-held shower Hand-held shower Head sliding bar For some models, water supply are done “through-wall elbow” Door Handle Installation 7. Glass Door Installation a. Put rollers on top of the doors into the top rail first. b. Then push the rollers downward to let the rollers to cut into the bottom rail. c. Install the door handles. d. Install the magnetic door seals to the front edges of the doors. e.
PAGE 8
Door roller in top track Door roller in lower track (31 stands for glass)
PAGE 9
8. Unit Assembly a. Connect the front frame with two side-back walls. Set both back panels on top the base and close to their designated locations. Both back walls should have all their necessary components installed. b. Set the front frame onto the base. Push a back wall to the frame and pull against L edge of the front frame post #37. Use 5 of ½” stainless steel screws to secure the back wall to the front frame. Repeat the same procedure for the other back wall. c.
PAGE 10
. Caulking Use silicon sealant to seal all of the seams or joints from inside the shower