Installation Guide

ManualsBrandsHeirloom Home Products ManualsBathroomS-3232 Black Round Shower Kit with Easy-Fit Drain

Shower & Bath Enclosure

Installation Instructions

Thank you for purchasing Heirloom Home Shower products. We are committed to providing

our customers with high quality products at a competitive price.

Please read all instructions carefully before and during installation.

Professional help is required for installation.

These installation instructions should be used as a guideline. Your specific shower or bath

enclosure may differ from the figures shown in these instructions. This instruction is for

shower models as follows: S-3232, S-3232EF, S-3636, and S-3636EF

Additional Installation Tools and Materials:

1” long #6 metal screws (smallest head) (4 Pcs)

Silicone sealant

Phillips head screw driver

Flat head screw driver

Rubber mallet

Power drill and bits

1X4 lumber of 70” long, two pieces

Flexible 1-1/4” PVC hose for S-3232EF and S-3636EF models

The shower is delivered in a wood crate with carton box contents as follows:

Carton 1: front glass panels (2 pcs #29), glass doors (2 pcs #31), seal strips (2 pcs #34, 2 pcs

#36), Stiles (2 pcs #37), Stile seals (2 pcs #28), door rollers (8 pcs #32), door handles (2 pcs

#33), screws (8 pcs #27), panel clips (4 pcs #41), screws for the clips (4 pcs #40), door roller

stops (8 pcs #25), door stopper screws (8 pcs #24)

Carton 2: back wall panels (Parts #7 and #17),

Carton 3: base (1pc #12), top roof (1 pc 04), door tracks (2 pcs #35, same tracks), valve (1 pcs

#46), shelf (1 pcs #08), through-wall elbow (1 pc #11), hand-held shower head (1 pc #18),

flexible water hose (1 pcs #21), water supply hose (braided) (1 long and 1 short #10), hand-held

shower rest (1 pc #19), over-head shower head (1 pcs #16), Drain with flexible hose if you

ordered 1-1/2” drain or EF model (1 pcs #23), screws for the overall assemble (15 pcs #06)

Please use Parts List to check the contents above.

Please use parts # when ordering missing or replacement parts.

Summary of content (8 pages)

PAGE 1
Shower & Bath Enclosure Installation Instructions Thank you for purchasing Heirloom Home Shower products. We are committed to providing our customers with high quality products at a competitive price. Please read all instructions carefully before and during installation. Professional help is required for installation. These installation instructions should be used as a guideline. Your specific shower or bath enclosure may differ from the figures shown in these instructions.
PAGE 2
1. Pre-installation Check the area you want to install your unit for the following: a.Water hook-ups are located on the left back wall (when facing the shower) at 24” from the corner and 48” above the floor. Please use flexible PEX or flexible water hoses of about 3’ long and with ½” FIP fittings for both hot and cold water. If right hand side water supplies chosen, please have water supplies on the right hand at 12” from the corner and 48” above the floor. b.
PAGE 3
. Glass Frame Assembly a. Connect curved door roller tracks to the vertical stiles with two metal screws as shown by the illustration. b. Top and bottom tracks (#35) are identical but they have to be placed in the correct orientations as shown by the drawings below. Top Track Bottom Track c. Install door stiles (#37) to the door tracks as shown by the illustration, using #6 2” long iron screws (8pcs provided).
PAGE 4
. Glass Panel Installation Install fixed glass panels to the door frame as shown by the illustration.
PAGE 5
. Glass Door Assembly a. Install the door rollers as shown. The rollers with screws are on the top. The screws are for height adjustments. The rollers with springs are on the bottom. b. Locate handle holes on the doors and install water seal strips with magnets (dark brown) on the edges near the door handles and clear strips (4) to the other edges as shown by the illustration.
PAGE 6
. Back wall Assembly a. Install glass shelf, hand-held mounting bracket, towel bar if applicable, through-wall elbows to back walls through pre-drilled holes. b. Please check the installation diagrams below: Shelf installation Through-wall elbow installation Hand-shower head mounting hook Hand-held shower 7. Glass Door Installation a. Put rollers on top of the doors into the top rail first. b. Then push the bottom rollers down and onto into the bottom rail. c. Tighten the rollers. d.
PAGE 7
Shampoo dispenser installation Door Handle Installation 8. Unit Assembly a.Connect the front frame with two side-back walls. The ½” stainless steel screws must be put on from the backside of the shower. Therefore, this connection must be done off the shower base. Have doors removed from the front frame. b.Connect two back wall together with 90 degree angled frame to cover over the square frame. Use ½” screws. c.Connect water supply to the shower.
PAGE 8
9.