User manual

Installation instructions Art. No. 40462 Page 1 of 1 Status 8.2014
GB Installation and operating instructions
Floor socket
Art. no. 40462
Many thanks for deciding to buy our floor socket.
Our floor socket is made out of sturdy, high value materials. This guarantees you an attractive appearance and a
high degree of reliability. The floor socket is suitable for use in dry and protected inside areas.
Please read through the installation and operation instructions carefully and keep these in a safe place.
We do not accept any liability for damage to persons or property caused by not following the instructions, or
improper use or for changes made to the product.
Packaging contents:
 1 floor socket
 Installation and operating instructions
Technical Data:
Article Connection Load rating
Protection
class
Protection class
degree
40462 250V~ max.16A I IP 20
Safety and warning notes/installation:
 Make sure that the connection values for the power supply to your building installation agree with the
data on the rating plate of the product.
 Make sure, before using the article that it has not been damaged during transportation. The article must
not be operated if the electrical parts have become damaged. Repairs may only be done by a
specialised electrician.
 Keep the packaging material well away from children and household pets. Danger of suffocation!
 Never let children play unattended near the articles or other electrical devices.
 Make sure before connecting to a consumer point that the maximum load of 16At is not exceeded.
 The article cannot be connected one after the other.
 Before the installation is done, the connection lines to the building must be switched free from voltage
and protected against being switch on again. Take the appropriate automatic circuit breakers out of the
junction box in the building.
 Join up the connection lines now. The brown (or black) cable is usually the phase conductor, connect
this to the terminal marked with an "L". The blue conductor must be connected to the terminal marked
with an "N".
 Check the proper connections once again.
 Do not bend the cable, make sure that the cable and the plug are free from strain and rotational forces.
Protect all the cables and insulations from possible damage.
 Make sure you have a stable and reliable fastening.
 Switch on the circuit breakers of the junction box in the building again.
 The rating plate must not be removed.
 The entire product must not be changed or modified. Changes made to the product lead to invalidation of
the guarantee (warranty).
Care and maintenance:
 You must make sure that the power supply has been disconnected before cleaning.
 Use a dry cloth for cleaning.
 Never use chemicals, inflammable cleaners or abrasives for cleaning. These can damage the surfaces
and/or the insulation.
Disposal:
 Used electronic devices must be brought back to public collection points and must not be disposed of as
household waste.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein