User manual

1 of 2 | Dated 03.03.2016

GB Installation and Operating Instructions

Socket strip

Art. No. 45018.45019

These operating instructions refer exclusively to these products.

They contain important information for the start-up and handling of the socket strip.

Therefore pay attention to these operating instructions, even if you pass this product on to third

parties.

It is important, therefore, that these instructions are archived carefully for referring to information at a

later stage.

1. Introduction

Dear customer, thank you for deciding to purchase our product.

You have acquired a product from Vollmer, which has been built according to the current state of technology.

The socket strip fulfils the requirements of effective European and national guidelines

To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the

instructions of this operation manual!

2. Safety Instructions

 The guarantee becomes invalid if damage occurs due to the failure of following these operating

instructions!

 We do not accept liability for any consequential damage!

 Commissioning is strictly prohibited if there are any damages to the product.

 Do not allow children to play unsupervised near the socket strip.

 Do not allow the socket strip to come into contact with extreme heat or naked flames.

 The product in its entirety must not be altered or modified. Alterations to the socket strip invalidate the

guarantee.

 The type plate must not be removed.

3. Proper Use

The socket strip is designed for use in dry and protected indoor areas.

This product may:

 only be operated with a voltage of 230V ~50Hz

 only be operated on normal or non-flammable surfaces

 not be subjected to strong mechanical loads or heavy soiling.

PAGE 1
GB Installation and Operating Instructions Socket strip Art. No. 45018.45019 These operating instructions refer exclusively to these products. They contain important information for the start-up and handling of the socket strip. Therefore pay attention to these operating instructions, even if you pass this product on to third parties. It is important, therefore, that these instructions are archived carefully for referring to information at a later stage. 1.
PAGE 2
4. Before Installation/Commissioning      The socket strip may only be operated once removed from the packaging. Remove the product from the packaging carefully. Make sure that the socket strip has not been damaged during transport before putting the light into operation. The socket strip may not be operated if there are any damages to electrical parts. Repairs may only be carried out by a qualified electrician. Keep packaging materials away from children and pets.