User manual

Installation instructions Art. No. 45086,45087 Page 1 of 1 Status 02.2016
GB Installation and operating instructions
Socket plug with switch
Art. No. 45086,45087
Many thanks for deciding to buy our socket plug.
Our article is made out of sturdy, high value materials and is equipped with an illuminated switch and child
protection. This guarantees you an attractive appearance and a high degree of resistance to corrosion. The
adapter plug is suitable for use in dry and protected inside areas.
Please read through installation and operation instructions carefully and keep these in a safe place.
We do not accept liability for damage to persons or property cause by non observation of the instructions,
improper handling or for unauthorized changes made to the product.
Package contents:
 1 socket plug
 Installation and operating instructions
Technical data:
Article Article Load
Protection
class
Degree of
protection
45086
230 V , 50 Hz
max. 3500 W, max.16A I IP 20
45087
230 V , 50 Hz
max. 3500 W, max.16A I IP 20
Safety and warning notes/instruction:
 Make sure that the connection values of your building installation for the power supply to the article
comply with the data stated on the name plate of this product.
 Make sure, before using the product that this has not been damaged during transportation. Do not
operate the product if the electrical parts have become damaged. Repairs may only be done by a trained
specialist electrician.
 Keep packaging materials well away from children and pets. Danger of suffocation!
 Do not let children play unattended in the area of the product or other electrical appliances.
 Make sure before connecting to a consumer device that the maximum load does not exceed 3500W.
 The product must not be plugged in one after the other.
 Voltage free only when the plug has been taken out
 The socket plug must not be covered.
 The name plate must not be removed.
 The entire product must neither be changed nor converted. Changes made to the product lead to
invalidation of the guarantee (warranty).
Care and servicing:
 You must make sure that the power supply is disconnected before cleaning. Remove the socket plug
from the socket.
 Use a dry or slightly damp cloth for cleaning.
 Never use chemicals, inflammable cleaners or abrasives for cleaning. This could damage the surfaces
and / or the insulations.
Disposal:
 Old electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Circuit breaker
Note:
If the overcurrent protection has tripped
• Unplug
• Power switch Press