User Manual

Moving the left stick

left or right will cause

the quad to rotate in

that direction.

Rotates Left or Right

Rotates Left or RightRotates Left or Right

ADJUSTING THE FLIGHT SENSITIVITY

You can make your 1SQ V-cam ﬂ y more aggressively by changing the gyro

sensitivity. To do this press and hold the right control stick down so the

transmitter will emit a slow beeping sound. While holding the control stick

down so the transmitter will continue to beep, move the left control stick up

or down to adjust the sensitivity percentage shown on the LCD screen. A

higher value will make the 1SQ V-cam ﬂ y more aggressively and lower value

less aggressively. We have found 35% to 40% a good all-around setting.

WARNING: If this value gets bumped to 0 your quadcopter will respond very

slowly to any right stick input. If the value is set too high the quadcopter will

be overly sensitive and might be impossible to ﬂ y.

FLIPPING THE V-CAM

To ﬂ ip the V-cam, press and hold the ﬂ ip button. Quickly move the right stick

in the direction you want to ﬂ ip. To maintain altitude, it’s a good idea to be

climbing before you ﬂ ip to give the Quadcopter upward momentum.

VIDEO AND PICTURE TAKING

To enter video mode, press the video button once. Press the button again

to start taking video. You will see the LED on the side of the V-cam ﬂ ash

when video is being captured. To turn the video off simply press the video

button again and the LED will remain steady on. To switch to picture taking

mode press the picture button one time to enter picture mode. Press the