User Manual

picture button again to take the picture. You will notice that the LED will ﬂ ash

momentarily as the picture is being taken. When the ﬂ ashing is complete

you can take more pictures. You can switch back and forth between Video

and Picture but remember you will have to press the appropriate button to

re-enter that mode.

HELI-MAX TX460 SERVO REVERSING

This transmitter features SLT protocol. Therefore, it will bind with other SLT

receivers. In those applications, it may be necessary to reverse the servo

travel direction as follows:

❏ 1. With the transmitter OFF, push

and “hold” the rudder trim button to

the right and the throttle trim button

down and then turn ON the transmitter

❏ 2. Let go of the trim buttons and

you will see 1-1 or 1-0 displayed. The

first Digit is the channel number. To

change the channel you want to

reverse, push down on the right stick.

To reverse the travel direction, push

the elevator trim button up or down so

the second number changes. The

V-Cam travel direction settings should

be “1” for all channels.

❏ 3. To confirm the change and exit

to normal operation, push down on

the left stick.