User Manual

INSTALLING THE MICRO SD CARD

❏

Flip the model over and push the SD card into the slot on the side of

the camera module. When the card

is correctly installed, it will click. To

remove the card, simply press on

the card again and the inner spring

system will help eject the card. Note:

The card must be in place to program

and capture video or pictures. The

V-cam has no internal memory.

PREPARING YOUR RTF MODEL

❏ Install 4AA batteries in the

transmitter by removing the

battery cover from the back of

the transmitter and installing the

four “AA” batteries. Double-check

the polarity of each battery before

replacing the battery cover.

❏ Turn the trans-

mitter on and make

sure that there is a

blue light behind

the Heli-Max

panel at the top

of the transmitter.

The LCD screen

should be on with

a throttle position

indicator and other

information. Make sure the electronic trim buttons on the transmitter are

centered. Trims are not needed as the Heli-Max TAGS-FX Sensor Fusion

system controls all flight centering.