User Manual Conquest 10ST XLR 2WD Brushless Helion-RC

QUICK-START GUIDE
Full manual available to download from: www.Helion-RC.comFull manual available to download from: www.Helion-RC.com
5
Re-insert the fully charged battery
pack into the cradle and tightly
secure it with the hook and loop
straps.
6
Remove the battery cover from the
underside of the ET3 transmitter
and insert four AA alkaline cells.
7
Ensure the radio switch is in the
OFF position, then connect the
battery to the ESC.
8
Replace the body and secure it
with the four body clips.
9
Switch ON your IKONNIK ET3
transmitter and ensure the LED
is lit solid red and that no alarms
are audible.
LED
CH2 EPA
D/R
CH1 &
CH 2
Trim