HLNB0020 Helion Rivos Manual

8
Brushless Motor Upgrade
Disconnectthebrushedspeedcontrol
fromthethrolechannelofthe
receiver.
Loosen the two set screws on the motor
coupler.
Disconnectbothwaterlinesfromthe
brushed speed control.
Remove the four phillips screws from
themotormount.Disconnectthewater
lines.Remove motor and speed control
from the hull.
Install the brushless motor into the hull
with the included 3mmX7mm screws.
Make sure that the motor wires are
facing up.
Install the brushless motor mount to
the brushless motor using the included
3mmX6mm machine screws.
Install the new motor coupler making
suretoaligntheatswiththesetscrews.
Remove the water line and replace with
new long water line.