deutsch / english UP S4MB-CTR UP W8MB-S4 UP W8MB-S4 UP C42MB-FRT UP C42MB-FRT UP X4MB-FRT UP X4MB-FRT UP S4MB-SUR UP S4MB-SUR DSP amplifier UP C42MB-FRT / UP X4MB-FRT UP S4MB-SUR / UP S4MB-CTR / UP W8MB-S4 UPGRADE Lautsprechersysteme für Mercedes-Fahrzeuge UPGRADE speaker systems for Mercedes vehicles
Congratulations! Dear Customer, Congratulations on your purchase of this highquality MATCH speaker system. This system highlights best quality, excellent manufacturing and state-of-the-art technology. Thanks to more than 30 years of experiences in research and development of audio products this speaker system generation sets new standards. We wish you many hours of enjoyment with your new MATCH speakers.
Dimensions UP S4MB-FRT: UP S1MB-FRT: UP X4MB-FRT: UP S4MB-SUR: 10 *All dimensions are noted in mm
UP S4MB-CTR: UP W8MB-S4: Left *All dimensions are noted in mm Right 11
Installation Removal of the door panel / rear side panel / center protective cover In order to install the MATCH speakers in the original mounting positions it is mandatory to remove the door panels / rear side panels / center protective cover. If you are uncertain how to remove the panels / protective cover, please either ask your local Mercedes dealer or an experienced car audio dealer for assistance. In any case follow the instructions of the car manufacturer.
Installation of the UP X4MB-FRT The UP X4MB-FRT is a 2-way coaxial system, which will be installed in the original midrange speaker position. After you have dismantled the cover, you can remove the original midrange speaker. Then connect the UP X4MB-FRT to the original speaker cable harness and insert it into the original mounting position (see figure page 12, refer to item “Installation of the UP C42MB-FRT”).
Technical Data 2-way systems: UP C42MB-FRT UP X4MB-FRT Power RMS / max. 60 / 120 Watts 60 / 120 Watts Frequency response 90 Hz - 25,000 Hz 90 Hz - 25,000 Hz Impedance 4Ω 4Ω Efficiency 1 W / 1 m 89 dB 89 dB Cone material TW: Coated silk dome W: Coated paper TW: Coated silk dome W: Coated paper Crossover Separate, 6 dB slope with 3-stage tweeter level adjustment Integrated, 6 dB slope Single speakers: Power RMS / max.
Legal note • • • • MATCH by Audiotec Fischer or Audiotec Fischer GmbH are in no way affiliated with the Daimler AG or any of its subsidiaries or affiliated companies connected to, or is acting on its behalf or with its authorization. All registered product names, trade marks and brands are the property of their respective owners. The compatibility with the specified types of vehicles reflects the information available on May 2019.
Audiotec Fischer GmbH Hünegräben 26 · 57392 Schmallenberg · Germany Tel.: +49 2972 9788 0 · Fax: +49 2972 9788 88 E-mail: match@audiotec-fischer.com · Internet: www.audiotec-fischer.
