ALFRESCO OUTDOOR HEATER 2400W WITH REMOTE USER MANUAL Model No.: APH2400R BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
IMPORTANT SAFEGUARDS When using any electrically powered product, basic safety precautions should always be followed, including the following: PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property: • Carefully read all instructions before operating your new product for the first time and save for future reference.
• Use of an extension cord is not recommended. However, if it is absolutely necessary ensure the cord is short as possible (long cords coiled up can overheat and cause tripping accidents). • Do not use the appliance on the same socket or electric circuit with other electrical appliances so as to prevent the circuit from being overloaded, which will cause fire. Please do not prolong the power cords by yourself or use movable socket.
• Do not cover the appliance with clothes, towels, blankets or other things or use it to dry clothes. Fire hazard! • Keep the mains power cord at a safe distance from the heater. During heating the mains cord must not be allowed to touch with hot parts of the heater or sharp edges. • Never touch live parts! Danger to life! • Never operate the appliance with wet hands! Danger to life! • Never rotate the heating part of the appliance during operation.
• Heller strip heater has an IP rating of 44. This means it is safe for water ingress. The heater can be safely cleaned. • Heller strip heater has undergone extensive testing in laboratory conditions. It has been this testing that gives the purchaser the confidence of a quality product. • The outdoor strip heater comes in plug. In both cases the fixed wiring must be installed by a licensed electrician in accordance with the relevant wiring regulations.
PRODUCT OVERVIEW Why choose Heller strip heaters for your outdoor or hard-to-heat indoor area?: As there is typically constant movement in an outdoor or open indoor area, many conventional patio heaters rely on convection heating which works by heating the surrounding air. This can be quite impractical for these areas, as this heated air can easily blow away with natural air movement. Radiant style heaters transfer heat directly to objects through infra-red waves.
PACKAGING • After unpacking the appliance, check for transport damage and the contents for completeness! In the event of damage or an incomplete delivery, contact your authorised retailer! • Do not discard the original box! It can be used for storage and dispatch to avoid transport damage. • Dispose of the packing material in a proper manner. Plastic bags should be kept away from children. EASY TO USE The standard Heller strip heater is controlled by remote control.
In most outdoor or difficult-to-heat heat areas, there are 2 options when looking at the size and quantity of the heater required. Option 1 is to comfort heat the entire area based on the total dimensions of the space, regarding of whether the entire area is being fully occupied. Spot heating will allow the area to be “zoned”, meaning heating only the areas that are being used, such as tables in a restaurant or outdoor alfresco area.
The heating surface must never be directed towards the ceiling INSTALLATION INSTRUCTIONS Spare parts size drawing
Model No. Dimension A Dimension B APH2400R 1462mm 800mm STEP 1: Installation of adjusting bracket and sliding bracket. Adjusting bracket Sliding bracket Screw + Spring washer + Nut(Spec:M6) STEP 2: Installation of sliding bracket and heater (as arrow points).
STEP 3: 4 x Holes on the wall, then 4 x expansions screws into the hole (as arrow points). hole deep 45MM Hole diameter 11MM Expansion screws’ spec M8*60 STEP 4: Fix adjusting bracket on the wall (as arrow points). expansion screws Flat washer Spring washer Nut(Spec:M8) （） STEP 5: Installation of two adjusting brackets, make sure lock the brackets tight by Butterfly hand screw.
INSTALLATION DIAGRAM STANDARD MOUNTING BRACKETS The Heller strip heater comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or wall mount, and come with preset angle options of parallel, 30° and 60°.
REMOTE CONTROLLER Model NO. APH2400R POWER(W) 2400 P1(W) P2(W) 800 1600 P3(W) 2400 TIME(H) 24 INSPECTION ITEMS AFTER INSTALLATION Items to be checked Situation caused by improperly installation Is installation stable? The equipment may fall off or shake. Is heat insulation adequate? Damage objects close to equipment. Does power voltage same as voltage shown on product rating label? Equipment failure. Does wire connection correct? Equipment failure.
based cleaners or other harsh cleaning products • When handling the heater, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark the surface of the heater. • Do not use high pressure water to clean heaters. SPECIFICATIONS Model NO. Dimension(mm) Net weight(kg) Gross weight(kg) APH2400R 1460 x 50 x 200 11 12.8 CUSTOMER SERVICE Australian Customer Service GAF Control (Sales) Pty Ltd P.
WARRANTY TERMS & CONDITIONS Warranty Terms & Conditions The below Warranty Terms and Conditions apply for Australia and New Zealand only. For international warranty please refer to international warranty terms and conditions. Provision of this warranty is subject to: 1. The Heller product must be installed in accordance with the Installation Instructions and relevant electrical standards and codes by a fully qualified electrician. 2.
