Instruction Manual 40cm Pedestal Fan Model: PF40 READ AND SAVE THESE INSTRUCTIONS
Please read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.
Do not cover the grill, or operate in close proximity to curtains etc. The use of attachments or accessories not recommended or sold by the product distributor may cause personal or property hazards or injuries. This product is intended for normal domestic/household use only. Never leave a working appliance unattended, even for a short period of time – always switch it off. Please unplug the appliance from the power supply when not in use. Use this fan as described in this manual.
PARTS & FEATURES 1. Grille 2. Oscillating Knob 3. Fan Blade 4. Speed switches 5. Control Panel 6. Support Pole 7. Height Adjustment Ring 8. Support Pole 9. Base Cover 10. Cross Base ASSEMBLY INSTRUCTIONS Ensure your fan is unplugged from the power supply before assembling. 1. Take all parts out of the box and remove any protective wrapping.
2. Assemble the base to the support pole using the fasteners provided (see Figure A). 3. Loosen the height adjustment ring and extend the support pole to your desired height. Put the base cover over the cross base (see Figure B). 4. Tighten the height adjustment ring to prevent slipping, then put the fan assembly onto the support pole and tighten the support pole screw manually. 5.
1. Place the fan on a stable, level surface. 2. Press the speed button to select the speed of the fan from LOW, MEDIUM and HIGH, in order to turn the fan ON. The fan speed is controlled by pressing the switch: 0 – OFF 1 – LOW 2 - MEDIUM 3 – HIGH 3. To start the oscillating function, push down the oscillating knob located on the top of the motor housing. To stop the fan from oscillating, pull the oscillating knob up. 4. The fan and motor assembly are attached to a 4-position ratchet.
SPECIFICATIONS Model Description Voltage Frequency Wattage PF40 40cm Pedestal Fan 220-240V~ 50/60Hz 60W CUSTOMER SERVICE Australian Customer Service GAF Control (Sales) Pty Ltd P.O Box 19 Altona North Victoria 3025 Phone: 1300 659 489 Hours: 9am-5pm (EST) Mon-Fri www.gafcontrol.com.au *This product may vary slightly to the product illustrated due to ongoing product development.