Download

CAUTION: To avoid of electric shock, you must always switch off and unplug the unit before cleaning.
1. Place the fan on a stable, level surface.
2. Press the speed button to select the speed of the fan from LOW, MEDIUM and HIGH, in order to
turn the fan ON.
The fan speed is controlled by pressing the switch:
 0 – OFF
 1 – LOW
 2 - MEDIUM
 3 – HIGH
3. To start the oscillating function, push down the oscillating knob located on the top of the motor
housing. To stop the fan from oscillating, pull the oscillating knob up.
4. The fan and motor assembly are attached to a 4-position ratchet. Tilt up or down until the
assembly clicks into the desired position.
5. To adjust the height of the fan head, loosen the height adjustment locking nut, then adjust to the
desired height and then tighten the nut.
6. Press “0” button to switch the fan OFF.
CARE & CLEANING
 Your appliance must be switched OFF via the main power supply and unplugged before
proceeding with any cleaning.
 Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush.
 We recommend lightly running a vacuum cleaner brush nozzle over the fan grill to remove any
dust or dirt that may have accumulated.
 Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the
appliance.
 Never immerse the appliance in water!
 Avoid all other types of detergents, cleaners, solvents that may contain chemicals, which could
damage parts of the unit.
 If the unit will not be used for a long period of time, store in a dry place.
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.