Data Sheet

Type HIS-3
Material Polyolefin, cross-linked (POX)
Shrink Ratio 3:1
Longitudinal change
after shrinkage
-5% max.
Minimum Shrink
Temperature
+100 °C
Operating
Temperature
-55 °C to +135 °C
Insulation Class B (VDE 0530)
Dielectric Strength 20 kV/mm according to ASTM D 150
Flammability UL224 VW-1
Heat Shrinkable Tubing
249
2.1
Insulation Products
HIS is a range of two heat shrink tubing
types in handy dispenser boxes. The range
consists of HIS-3 and HIS-A (a dual wall
tubing) with 3:1shrink ratios. With their ideal
shrink ratio of 3:1 these products replace
many differently sized tubing solutions by
fitting almost any heat shrink task. The
handy dispenser boxes allow for proper
storage and the tubing can remain dust-free
even after breaking open a package.
Please note! Not all products listed on this page may have this approval.
For product specific approvals please refer to the Appendix.
• HIS-3
HIS-3 can fit highly variable substrate dimensions.
Heat Shrinkable Tubing 3:1
on a Reel
Features and Benefits
HIS-3 with 3:1 shrink ratio is the new
generation of tubing in dispenser packs
fitting highly variable substrate dimensions.
Another great benefit of HIS-3 is that only
5 sizes cover the same range of diameters
from 1mm up to 20mm in 10 sizes of 2:1
shrink ratio tubing, thus reducing the
inventory by half. To complete the range
sizes 9/3 and 18/6 are also available.
Application
• General purpose electrical insulation
• Coloured Identification
• Protection against corrosion and
mechanical abrasion

Material Data
Date of issue: April 2011