Datasheet

Cable Ties and Fixings
Cable Ties Inside Serrated
1.2
80
1. Open lock head for quick and easy
insertion.
2. Two rails on the strap ensure a perfect
guidance for the tracks in the head.
3. The locking device interacts safely with
the serration of the cable tie.
4. The tracks prevent a deformation of the
head under load.
5. The thin part of the cable tie can be
simply placed into the open lock head.
6. The large ribbed tail allows a safe and
ergonomic installation.
7. Integrated pre locking feature (starts
with type Q30).
2. Pull the tie through the head until the
bundle is fixed.
3. Cut off the remaining part of the tie with
an application tool.
Pre-locking Function of the Q-tie:
1. Insert the thin part of the cable tie into
the open lock head.
Application Method:
1. Insert tail into lock head and push tail
partly in the head.
3. If installation is finished, Q-tie can be
tightened and cut off - either manually or
with an application tool.
2. To release the tie push tail end slightly
out of head.
Please find more Q-Series
products for your system
solution on page 166 and
508.
Date of issue: April 2011