Datasheet

Article-No. Type Colour
Bundle
Ø min.
Bundle
Ø max.
Width
(W)
Height
(H)
Length
(L)
Width
(W2)
Min. Tensile
Strength (N)
Pack
Cont.
Recommended
Labels
111-81821
IT18R
Natural (NA) 6.00 22.00 25.00 8.00 100.0 2.30 80 100 TAG23-06TD1
111-81919
IT18FL
Natural (NA) 1.50 19.00 20.50 9.00 110 2.50 80 100 TAG18-07TD1
111-85019
IT50R
Natural (NA) 9.50 44.50 28.00 12.90 203 4.60 225 100 TAG23-10TD1
111-85219
IT50RD
Natural (NA) 10.00 44.00 29.00 26.30 205 4.70 225 50 TAG26-21TD1
111-85119
IT50RT
Natural (NA) 10.00 44.00 46.00 26.30 205 4.70 225 50 TAG43-21TD1
111-85319
IT50L
Natural (NA) 10.00 100.00 56.00 12.80 390 4.70 225 100 TAG52-10TD1
All dimensions in mm. Subject to technical changes.
Identification Systems
Wire and Cable Markers
510
5.2
Material Polyamide 6.6 (PA66)
Colour Natural (NA), Black (BK),
Available on request
Operating
Temperature
-40 °C to +85 °C Continuous,
(+105 °C for 500 h)
Flammability UL94 V2
!
!
IT50R
IT50RD
IT50RT
IT50L
Please note! Not all products listed on this page may have this approval.
For product specific approvals please refer to the Appendix.
IT18R
IT18FL
Certifications please
see Appendix.
Identification ties and plates
for marking cable bundles
Features and Benefits
One of the major benefits is the ability to
both secure and identify cable bundles at
different times.
One operation with two benefits.
These cable ties are suitable for the
identification and securing of cable bundles,
saving valuable installation time by using
just one product to both secure and identify.
They can be marked either on-site or after
bundling has taken place.
They can be marked manually using the
T82S series of indelible marker pens. In
addition there is a large selection of labels
available for marking.
Application
halogenfree

Material Data
• IT Ties
More information on
marker pens can be
found on page 495.
Technical Table
Date of issue: April 2011