Datasheet

Installation Devices
HelaCon Easy
444
4.1
• HelaCon Easy
Solid
The HelaCon Easy connectors are exclusively
designed for use with solid wire, available in
two sizes up to 1.5 mm² and up to 2.5 mm²
conductor diameter. Bent, stranded or
fine-stranded conductors cannot be used
with HelaCon Easy.
Connectors
Features and Benefits
The range of push-in wire connectors are
used for fast, easy and reliable connection
and distribution of cable and conductors in
electrical housing applications. They used
within a typical range of housing voltage up
to 450 volts. A huge variety of input poles
allow a high flexibility in application
depending of the number of conductors
and available space. Diameters of up to
2,5mm² can conveniently be processed and
allow the use of thicker conductors when a
voltage drop occurs. The flexible fixing of the
double spring of HelaCon Plus allows
different conductor diameters in each entry
without influencing the adjacent ones. The
connectors can be used in all kinds of
junction boxes either on-wall or flush
mounted.
Application
The HelaCon Easy connectors are used for
fast, easy and reliable connection and
distribution of cable and conductors in the
field of electrical housing installations within
junction boxes and control panels.
Application Method
• Make sure that power is turned off before
installation
• Use solid copper conductors only
• Strip them off approximately 11 mm
• Insert them completely into the connector
• Use voltage tester via separate test entry
• To change or correct a wire, hold and
twist it alternatively left and right while
pulling the connector
The compact design of HelaCon Easy fits perfectly in tight spaces.
Just push-in and play. HelaCon Easy.
Date of issue: April 2011