Datasheet

Material Datasheet Polyamid 6.6
Technical Data
Material Polyamid 6.6
PA66
W
HS
HIRHS
Raw material:
PA 66 standard UV-resistant Heat stabilised Impact resistant /
heat stabilised
Colour:
natural Black Natural or black
black
Working temperature:
-40°C to +85°C -40°C to +85°C -40°C to 105°C -40°C to 105°C
short term (500 h):
+105°C +105°C +145°C
density:
1,13 g/cm³ 1,13 g/cm³ 1,13 g/cm³ 1,10 g/cm³
Melt point:
250-260 °C 250-260 °C 250-260 °C 262 °C
Flammability:
UL 94 V2 UL 94 V2 UL 94 V2 UL 94 HB
halogenfree halogenfree halogenfree
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: [phone]
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
This information is based on our experience and does not imply suitability without prior testing. Due to the variables of manufacture and environmental conditions it is
strongly recommended that samples are tested in-situ.
PM-JE.V01/04.06.2007