Data Sheet

ManualsBrandsHellermannTyton ManualsCable AccessoriesTLFX32YE-PO-X-YE Heatshrink marker 126 m

5.1

418

Further information at www.HellermannTyton.co.uk/identiﬁcation

Date of issue: April 2016

For product speciﬁc approvals and speciﬁcations please refer to the Appendix.

Identification Systems

Wire and Cable Markers

MATERIAL

Polyoleﬁn, cross-linked (PO-X)

Operating Temperature -55 °C to +105 °C

Minimum Shrink Temperature +100 °C

Shrink Ratio 2:1

Recommended Ribbon Type TTDTHOUT

Speciﬁcations

BS-6853:1999, BS-EN ISO 4589-

2, DIN 53438-3: 1984, DIN

5510-2, EN 45545-2: 2013 (R22

& R23, HL1, HL2, HL3), EN ISO

11925-2: 2002, NF F 16-101, NF

X 70-100-1: 2006, NF X 70-100-

2: 2006, UNI CEI 11170-3

TLFX is a rail approved 2:1 heatshrink material supplied as a continuous

tube and printable on both sides. The supplied accessories allow users

to either perforate the tubing at pre-determined lengths (P4000), or

fully sever the markers (S4000) whilst printing with the TrakMark DS

or TT4000

printer. Print with HellermannTyton's premium range of

thermal printers and ribbons.

Printers: TrakMark DS, TT4000

and TT430

Ribbons: TTDTHOUT, TTRC+

Accessories for TrakMark DS and TT4000

: Perforator (P4000),

Cutter (S4000)

Accessories for TT430: Cutter (S430), Perforator (P430)

Software: TagPrint Pro

Features and Beneﬁts

• Shrink ratio 2:1

• Available in yellow, white on request

• Cable range 50.8 mm to 1.2 mm

• Halogen Free

• Low smoke propagation, density and toxicity

• High Oxygen Index value (38 %)

• Meets EN45545-2 (HL3, HL2, HL1)

• Delivery in convenient storage boxes

• Easy label design with TagPrint Pro

Shrinkable markers "Continuous Tube",

thermal transfer

TLFX.

TLFX - 2:1 Rail LFH

TYPE

Supplied

Ø D min.

Recov.

Ø d max.

Wall

(WT)

Pack

Cont. Colour Article-No.

TLFX24WH 2.4 1.2 0.57 144 m White (WH) 554-51000

TLFX24YE 2.4 1.2 0.57 144 m Yellow (YE) 554-51001

TLFX32WH 3.2 1.6 0.58 126 m White (WH) 554-51100

TLFX32YE 3.2 1.6 0.58 126 m Yellow (YE) 554-51101

TLFX48WH 4.8 2.4 0.61 108 m White (WH) 554-51200

TLFX48YE 4.8 2.4 0.61 108 m Yellow (YE) 554-51201

TLFX64WH 6.4 3.2 0.61 90 m White (WH) 554-51300

TLFX64YE 6.4 3.2 0.61 90 m Yellow (YE) 554-51301

All dimensions in mm. Subject to technical changes.

Minimum Order Quantity (MOQ) may differ from package content.

Summary of content (2 pages)

PAGE 1
Identification Systems 5.1 Wire and Cable Markers Shrinkable markers "Continuous Tube", thermal transfer TLFX - 2:1 Rail LFH TLFX is a rail approved 2:1 heatshrink material supplied as a continuous tube and printable on both sides. The supplied accessories allow users to either perforate the tubing at pre-determined lengths (P4000), or fully sever the markers (S4000) whilst printing with the TrakMark DS or TT4000+ printer. Print with HellermannTyton's premium range of thermal printers and ribbons.
PAGE 2
Identification Systems Wire and Cable Markers 5.1 Shrinkable markers "Continuous Tube", thermal transfer TLFX - 2:1 Rail LFH Supplied Ø D min. Recov. Ø d max. Wall (WT) Pack Cont. Colour Article-No. 9.5 4.8 0.66 72 m White (WH) 554-51400 TLFX95YE 9.5 4.8 0.66 72 m Yellow (YE) 554-51401 TLFX127WH 12.7 6.4 0.68 54 m White (WH) 554-51500 TLFX127YE 12.7 6.4 0.68 54 m Yellow (YE) 554-51501 TLFX190WH 19.0 9.5 0.69 30 m White (WH) 554-51600 TLFX190YE 19.0 9.5 0.