Datasheet

Material Data Sheet Label Type 1402
Description: Clear, with a coloured or white marker field printed
Vinyl foil. The foil is very soft and flexible and at inside use
nearly unlimited durable.
The material is flame-retarding.
Application: Self-laminating labels for wire and cable marking,
also suitable for flat ribbon cables
Service temperature range: -40°C to +80°C
Minimum application temperature: min. + 8°C
Test method
Thickness: Facestock: 80 µm ± 10 % ASTM D 3652-83
Liner: PE-coated, white glassine paper, single-sided siliconised .
Adhesive specification: High tech acrylic adhesive with specific resistance against
chemicals, heat, moisture and UV
Adhesive performance: Stainless steel 15-19 N/25mm nach 24h FINAT TM1
Shear strength 120 hr FTM 7
Peel strength app. 550 N/m PSTC-7
Tack 110 g/cm² ASTM 2979-71
Chemical properties of facestock Good resistance against water, oil and many solvents
and adhesive:
Durability: At vertical outdoor weathering (central European normal climate)
normally 3 years.
Storage condition:
2 years at +21°C and 50% rel. air moisture
The storage in the original packaging is recommended.
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: [phone]
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
This information is based on our experience and does not imply suitability without prior testing. Due to the variables of manufacture and enviromental conditions it is
strongly recommended that samples are tested in-situ. A legal binding assurance for definite attributes can not be derive from our indications.
PM V2.0_05.05.14_sw