Data Sheet

MATERIAL DATASHEET HelaTape Flex 15
Technical Data
Application: Primary electrical insulation for all wire and
cable splices.
Material: Polyvinyl Chloride (PVC)
Colours: black, blue, red, yellow, green, white, green-yellow, brown,
grey, violett, orange, transparent
Insulation Voltage Range: max. 1000 Volts
Specification
Typical value*
Test method
Thickness : 0.15 mm IEC 60454-2
Tensile Strength : 28 N / 10 mm IEC 60454-2
Elongation : 200 % IEC 60454-2
Adhesion to Steel : 2.2 N / cm IEC 60454-2
Adhesion to Backing : 2.0 N / cm IEC 60454-2
Dielectric Strength : 45 kV/mm IEC 60454-2
Operating Temperature :-10°C - 90°C IEC 60454-3-1
Standard diameter core : 38mm
*These are typical values and should not be used for
specification purposes.
Flame retardant : yes
Meets RoHS & REACH requirements : yes
Installation Technique The tape shall be applied in half-lapped layers with sufficient
tension to conform and produce a uniform covering.
In most applications the tension force will reduce the tape
width to 5/8 of it´s initial width.
Apply the tape with no tension on the last wrap to prevent flagging.
Shelf life 5 years at recommended storage conditions.
Recommended storage conditions Relative humidity: 65%
Room temperature: 23°C
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: [phone]
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
Data in this table represent average test results and not to be used for specification purposes.
The product user should make his/her own test to determine the product's suitability for the intended use
PM.1.2/13.12.2017_chb