Datasheet
1.0
27
Further information at www.HellermannTyton.co.uk/fixings
Date of issue: January 2019
Cable Ties and Fixings
Material Information
MATERIAL
Material
Shortcut
Operating
Temperature Colour** Flammability Material Properties*
Material
Specifications
Polyamide 6.6
with metal particles
PA66MP
-40 °C to +85 °C,
(+105 °C, 500 h)
Blue (BU) UL 94 HB
• High yield strength
• Metal and X-Ray detectable
Polyamide 6.6
with metal particles
PA66MP+ -40 °C to +85 °C Blue (BU)
not flame
retardant
• High yield strength
• Metal and X-Ray detectable
Polyamide 6.6 V0 PA66V0 -40 °C to +85 °C White (WH) UL 94 V0
• High yield strength
• Low smoke emission
Polyester SP -50 °C to +150 °C Black (BK)
• UV resistant
• Good chemical resistance to most
acids, bases and oils
Polyetheretherketone PEEK -55 °C to +240 °C Beige (BGE) UL 94 V0
• Resistance to radioactivity
• Not moisture sensitive
• Good chemical resistance to acids,
bases, oxidising agents
Polyethylene PE -40 °C to +50 °C
Black (BK),
Grey (GY)
UL 94 HB
• Low moisture absorption
• Good chemical resistance to most
acids, bases, alcohol, oils
Polyolefin PO -40 °C to +90 °C Black (BK) UL 94 V0 • Low smoke emissions
Polypropylene PP -40 °C to +115 °C
Black (BK),
Natural (NA)
UL 94 HB
• Floats in water
• Moderate yield strength
• Good chemical resistance to acids,
bases and solvents
Polypropylene, Ethylene
Propylene Diene
Terpolymer rubber
free of Nitrosamine
PP, EPDM -20 °C to +95 °C Black (BK) UL 94 HB
• Good resistance to high
temperature
• Good chemical and abrasion
resistance
Polypropylene
with metal particles
PPMP -40 °C to +115 °C Blue (BU) UL 94 HB
• Metal and X-Ray detectable
• Heat resistant
• Moderate yield strength
• Good chemical resistance
Polypropylene
with metal particles
PPMP+ -40 °C to +85 °C Blue (BU)
not flame
retardant
• High yield strength
• Metal and X-Ray detectable
Polyvinylchloride PVC -10 °C to +70 °C
Black (BK),
Natural (NA)
UL 94 V0
• Low moisture absorption
• Good chemical resistance to acids,
bases, salts, alcohol, oils
Stainless Steel,
Stainless Steel
SS304,
SS316
-80 °C to +538 °C Natural (NA) Non burning
• Corrosion resistant
• Antimagnetic
• Weather resistant
• Chemical resistance
• SS316 also resistant against
seawater, salt spray and anorganic
acids
Thermoplastic
Polyurethane
TPU -40 °C to +85 °C Black (BK) UL 94 HB
• High elasticity
• Good chemical resistance to acids,
bases and oxidising agents
Tefzel
®
is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel
®
-
Tie. In additon to Tefzel
®
from DuPont HellermannTyton also uses equivalent E/TFE raw material from other suppliers.
**Further colours available on request.
* These details are only guide values. They should not be regarded as a exhaustive material specification
and are no substitute for suitability tests. Please see our datasheets for further details.
HF = Halogenfree
LFH = Limited Fire Hazard
RoHS = Restriction of Hazardous Substances