Datasheet

03/2017 031-93468

BRO Panel Builder

MATERIAL

Acrylonitrile Butadiene Styrene alloyed

with Polycarbonate (PC/ABS)

Colour Grey (GY)

Length (L) 2 m

Operating Temperature -25 °C to +90 °C

Flammability UL 94 V0

Hole dimesions

6.5

4.5

Width 25-60

48.5

100

Width 80-120

48,5

100

HelaDuct HTWD-HF wiring ducts are used to route and protect wires in

control panels and switching systems where there are high demands on

personal or material safety in case of ﬁre, such as in public transport,

tunnels, data-processing centers or public buildings.

Features and Beneﬁts

• Excellent ﬁre-safety characteristics

• Narrow slots suitable for small-diameter wires

• Smooth, burr-free edges protect installers from injury and wires from

damage

• Fingers can be removed with no sharp edges at pre-notched snap-off

points

• Further pre-notched snap-off point at base of sidewall allow cutting

out and removing sections of sidewall with no sharp edges

• Duct covers hold securely even in a vertical position and under

vibration

• Cover is ﬂush with side of duct, allowing for tight, contiguous

placement of duct

• Base perforation according to DIN EN 50085

Cable Protection Systems

Wiring Ducts

Halogen-Free Wiring Ducts

Halogen-Free wiring ducts HelaDuct HTWD-HF for high safety demands.

HelaDuct HTWD-HF

Punching acc. DIN EN 50085 wiring ducts HTWD-HF

PAGE 1
Cable Protection Systems Wiring Ducts Halogen-Free Wiring Ducts HelaDuct HTWD-HF HelaDuct HTWD-HF wiring ducts are used to route and protect wires in control panels and switching systems where there are high demands on personal or material safety in case of fire, such as in public transport, tunnels, data-processing centers or public buildings.
PAGE 2
Cable Protection Systems Wiring Ducts Halogen-Free Wiring Ducts HelaDuct HTWD-HF W3 W2 W H HelaDuct Wiring ducts HTWD-HF Width (W) Height (H) Width (W2) Width (W3) Pack Cont. Article-No. HTWD-HF-25X25 25 25 6 6.5 50 m 183-22525 HTWD-HF-25X40 25 40 6 6.5 48 m 183-22540 HTWD-HF-25X60 25 60 6 6.5 60 m 183-25060 HTWD-HF-25X80 25 80 6 6.5 20 m 183-22580 HTWD-HF-40X25 40 25 6 6.5 48 m 183-24025 HTWD-HF-40X40 40 40 6 6.