Datasheet
Material Datasheet splice set i-Line SF (safe filling)
Description:
Relicon® splice sets are suitable for universal use in the installation of plastic cables and
wires made from PVC, PE, EPR and VPE (z.B. N(A)YY, NYCWY) in low- voltage
electrical systems.
Area of application:
Indoors
Underground
Outdoors
Underwater
In installations channels
Properties:
Two- part, impact- proof, transparent moulding shells
Compact size
Default cable diameters on the moulding shells
SF- System
Immediately ready for use
Longitudinally and transversely watertight
Joint can be cast under water
Storage:
48 months
Included:
Relicon® PUR 33 cast resin ready for mixing transparent two- champer pouch
Transparent moulding shells
SF fillers and adapter
Protective gloves
Sponge for roughening the cable
PVC insulating tape
Assembly instructions
Note:
Connector not included
Tests:
CENELEC HD 631.1 S2 (PUR33)
Certified according to DIN EN 50393 (corresponds DIN VDE 0278-393)
Cable diameter
Socket Dimensions A/B
mm (from- to)
from
to
mm
435-00000 i-0 / SF PP/PUR CL 7-16 3 x 1,5 5 x 2,5 182/25 95 ml / 130 g
435-00001 i-1 / SF PP/PUR CL 8-24 3 x 1,5 4x 10 or 5 x 6 190/36 165 ml / 226 g
435-00002 i-1.5 / SF PP/PUR CL 8-24 3 x 1,5 4x 16 or 5x 10 215/39 220 ml / 301 g
435-00003 i-2 / SF PP/PUR CL 14-30 5 x 1,5 4x 25 or 5x 16 276/49 400 ml / 548 g
435-00004 i-3 / SF PP/PUR CL 23-35 5 x 10 4x 50 or 5x 35 360/54 655 ml / 897 g
435-00005 i-4 / SF PP/PUR CL 28-47 4 x 25 4 x 95 400/69 1140 ml / 1562 g
435-00006 i-5 / SF PP/PUR CL 33-55 4 x 50 4 x 150 520/100 2x 1450 ml / 1987 g
435-00007 i-6 / SF PP/PUR CL 48-70 4 x 150 4 x 240 700/128 4x 1640 ml / 2247 g
435-00008 i-7 / SF PP/PUR CL 55-77 4 x 185 4 x 400 870/140
5x 1950 ml / 2672 g
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: +49 (0) 4122/701-1
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
This information is based on our experience and does not imply suitability without prior testing. Due to the variables of manufacture and enviromantel conditions it is
strongly recommended that samples are tested in-situ
PM V01.0/14.10.15_rl
Conductor cross-section in mm²
Article-No. Typ Resin amount