Datasheet

1.0
27
Further information at www.HellermannTyton.com/fixings
Date of issue: 10/2017
Cable Ties and Fixings
Material Information
MATERIAL
Material
Shortcut
Operating
Temperature Colour** Flammability Material Properties*
Material
Specifications
Polyamide 6.6,
with metal particles
PA66MP
-40 °C to +85 °C,
(+105 °C, 500 h)
Blue (BU) UL 94 HB
• High yield strength
• Metal and X-Ray detectable
Polyamide 6.6,
with metal particles
PA66MP+ -40 °C to +85 °C Blue (BU)
not flame
retardant
• High yield strength
• Metal and x-ray detectable
Polyamide 6.6 V0 PA66V0 -40 °C to +85 °C White (WH) UL 94 V0
• High yield strength
• Low smoke emission
Polyester SP -50 °C to +150 °C Black (BK) halogen free
• UV-resistant
• Good chemical resistance to:
most acids, alkaliks and oils
Polyetheretherketone PEEK -55 °C to +240 °C Beige (BGE) UL 94 V0
• Resistance to radioactivity
• Not moisture sensitive
• Good chemical resistance to:
acids, bases, oxidizing agents
Polyethylene PE -40 °C to +50 °C
Black (BK),
Grey (GY)
UL 94 HB
• Low moisture absorption
• Good chemical oilsresistance to:
most acids, alcohol and oils
Polyolefin PO -40 °C to +90 °C Black (BK) UL 94 V0 • Low smoke emissions
Polypropylene PP -40 °C to +115 °C
Black (BK),
Natural (NA)
UL 94 HB
• Floats in water
• Moderate yield strength
• Good chemical resistance to:
organic acids
Polypropylene,
Ethylene-Propylene-
Dien-Terpolymere-
rubber
free of Nitrosamine
PP, EPDM -20 °C to +95 °C Black (BK) UL 94 HB
• Good resistance to high
temperatures
• Good chemical and abrasion
resistance
Polypropylene
with metal particles
PPMP -40 °C to +115 °C Blue (BU) UL 94 HB
• Metal and X-Ray detectable
• Heat resistant
• Moderate yield strength
• Good chemical resistance
Polypropylene
with metal particles
PPMP+ -40 °C to +85 °C Blue (BU)
not flame
retardant
• High yield strength
• Metal and x-ray detectable
Polyvinylchloride PVC -10 °C to +70 °C
Black (BK),
Natural (NA)
UL 94 V0
• Low moisture absorption
• Good chemical resistance to:
acids, ethanol and oil
Stainless Steel
SS304,
SS316
-80 °C to +538 °C Natural (NA) non-burning
• Corrosion resistant
• Antimagnetic
• Weather resistant
• Outstanding chemical resistance
Thermoplastic
Polyurethane
TPU -40 °C to +85 °C Black (BK) UL 94 HB
• High elastic
• Good chemical resistance to:
acids, bases and oxidizing agents
Tefzel
®
is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is
Tefzel
®
-Tie. In additon to Tefzel
®
from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers.
**More colours on request.
* These details are only rough guide values. They should not be regarded as a material specification and are no substitute for a
suitability test. Please see our datasheets for further details.
HF = Halogenfree
LFH = Limited Fire Hazard
RoHS = Restriction of Hazardous Substances