User's Manual

ManualsBrandsHelloBaby ManualsBaby Monitors2.4GHz Wireless Video Baby Monitor (Camera)

Table Of Contents

页 1

www.hellobaby.net.cn

service@hellobaby.net.cn

Focus on Mom & Baby Care !

Thank you for purchasing the HelloBaby baby monitor. HelloBaby is the best device for

monitoring your baby at all time. you can see and hear your baby sleeping in another room

or you can monitor your older children in their playroom. If you have any questions or

concerns, please feel free to email us at service @hellobaby .net.cn

Please retain your original purchase receipt for record purpose. For warranty service

of your HelloBaby product, you will need to provide a copy of your original purchase receipt

to confirm warranty status. Registration is not required for warranty coverage. Before you

use the product, we recommend you fully charge the battery in the parent unit, so that it

continues to work even when you disconnect it from the power supply and take it to another

location. Please read the safety instructions.

Please make sure you have the following in your package

Parent unit x 1 Camera unit x 1 Power Adapter x 2

User manual x 1 Wall-mounting kit x 1

1. SAFETY INSTRUCTIOINS

CAUTION: Keep the device away from children.

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of

children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use

the AC Adapters provided.

Choking Hazard: This product contains small parts, so exercise care when unpacking and

assembling the product.

Read and keep to instructions: All the safety and operating in structions should be read

before the video baby monitor is operated. This product cannot replace responsible adult

supervision.

Water and moisture: This product is designed for indoor use only. The unit should not be

exposed to rain, moisture, dripping or splashing. No objects filled with liquid should be

placed on top of, or beside the product, such as a glass or vase. This item should not be used

near water.

DO NOT: Use the appliance if the cord or plug is damaged. If your baby monitor is not

operating properly or has suffered any damage, contact “HelloBaby” service center to

request inspection and repair of the appliance in order to avoid any possible risk.

DO NOT: Attempt to repair or adjust any of the electrical or mechanical functions of the unit,

if you do, the guarantee will be made void.

Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that

may block the ventilation openings, or be placed in an enclosed area such as a bookcase or

drawer that may impede air flow.

Keep away from sources of heat: This unit should not be exposed to direct heat sources

such as a candle, radiator, heat register, stove or other appliance that emits heat. The unit

should not be left in direct sunlight.

Power source: This unit should only be used with the AC power adapters included in this

package (rated 6V 600mA/ rated 5V 1000mA).

Damage requiring service: This unit should be serviced by qualified personnel only when:

. Objects have fallen or liquid has been spilled into the product;

. The units have been exposed to rain;

. The units do not appear to operate normally or exhibits a distinct change in performance;

. The units have been dropped or the enclosure damaged;

2. WARRANTY TERMS

We offer one-year warranty from the original purchase date against defects in workmanship

and materials. If you have warranty or support issues, please contact our after sales service

via email.

3. INSTALLATION GUIDELINES

* To use your parent unit and camera unit together, you must be able to establish a radio

link between them, and the range will be affected by environmental conditions.

* Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors or

reinforced concrete between the baby and parent unit may block the radio signal.

* The signal strength may also be reduced by other solid structures, like walls, or by radio

or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent

lights or dimmer switches.

* Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth

systems, or microwave ovens, may cause interference with this product, so keep the baby

monitor away at least 5ft (1.5m) from these types of products, or turn them off if they

appear to be causing interference.

4. PLACEMENT OF THE CAMERA UNIT

The camera can be placed at wall mount and desktop modes. Place the baby monitor

away from heat sources such as radiators, chimneys, cookers and direct sunlight; place

the baby unit away from TV sets, microwave oven and to ensure optimal reception.

5. GETTING STARTED

5.1 TURN ON THE CAMERA UNIT:

*Only use the A/C adapter included in this package (5V, 1A);

1. Insert the plug of the Camera Unit power adaptor into the DC socket in the back of the

Camera unit.

2. Insert the other end of the power adaptor into a suitable electrical outlet.

3. Once the adapter is connected, the power LED will light up.

5.2 TURN ON THE PARENT UNIT:

* Only use the A/C adapter included in this package (6V, 600mA);

* The parent unit is supplied with a built-in rechargeable Li-ion battery (3.7V 950mAh).

Charge the battery in the Parent Unit at least 12 hours before using for the first time or

when the Parent Unit indicates that the battery is low.

1. Insert the round plug of the Parent Unit's power adaptor (Output 6V 600mA) into the DC

socket of the Parent Unit.

2. Insert the other end of the power adaptor into a suitable electrical outlet.

3. Press and hold the power key on the top of the parent unit. The battery status indicator

will light up indicates that the Parent Unit is connected to the electrical outlet.

5.3 INFRARED NIGHT VISION (AUTOMATIC)

The infrared night vision function allows the camera to pick up images in dark or low

light conditions. In this mode, only black and white images will be displayed on the

monitor, the optimum image is 6ft (2m) distance between baby unit and object. When

the camera is in night vision mode, the icon will be displayed on the top of screen.

6. PRODUCT OVERVIEW

6. 1 ICONS OVERVIEW:

3 4

英语说明书(HB248)

尺寸:540*120MM

说明书为折叠式

料号：20040205C

颜色：彩色

类型：环保

版本：1.3

--------

Signal Strength

Alarm

--------

Volume

--------

Brightness

--------

Zoom

--------

Two-Way Talk

--------

Lullaby

--------

Camera

--------

Battery Level

--------

Temperature

--------

Video Off

Night vision

--------

CMOS sensor

Speaker

Light sensor

MIC

Infrared LEDs

Power LED

Pair key

DC-Jack

Temperature

sensor

Antenna

6.2 PARENT UNIT OVERVIEW:

Charging LED

Power LED

Sound Level Indicator

Power key

7. Key OPERATION

7.1 POWER SAVE/SCREEN OFF

Short press the power key to turn on / off the screen.

7.2 UP ▲ KEY

Press once to tilt the camera up by one step. Press and hold to tilt continuously.

7.3 DOWN ▼ KEY

Press once to tilt the camera down by one step. Press and hold to tilt continuously.

7.4 LEFT ◀ KEY

Press once to pan the camera left by one step. Press and hold to pan continuously.

7.5 RIGHT ▶ KEY

Press once to pan the camera right by one step. Press and hold to pan continuously.

7.6 CAMERA VIEW/SCAN

Press scan key to view/scan camera; during scan mode, the scan icon will be

displayed on the top of screen. and each camera is video will be stay on the LCD around

10 seconds then change to next camera;

7.7 DIGITAL ZOOM

Press and hold the key around 2 seconds to operate zoom in/ out;

7.8 Two Way Talk

Press and hold key to enter two way talk mode. A microphone icon will be displayed

on the top of the LCD screen. Release the key to stop.

Note: When you are in the two-way talk mode, the parent unit speaker is muted.

8. MENU OPERATION

8.1 PAIRING THE CAMERA AND PARENT UNITS

The baby unit is pre-registered to your parent unit. You do not need to register it again

unless the baby unit loses its link with the parent unit. To re-register your baby unit, or

6. 3 BABY UNIT OVERVIEW:

Model: HB248

Antenna

Baby Monitor Model:HB248RX

S/N:19000001RX

FCC ID :2AF2R-HB24RX

IC : 20674-HB24RX

MADE IN CHINA

INPUT: DC6V 600mA

Use only power adapters listed

in the user instructions.

Li-ion Battery 3.7V, 950mAh

reset

2.4'' Diagonal TFT LCD

Exit/Two Way Talk

Menu/OK

Zoom / View / Scan

MIC

Right Key

Up key

Down Key

Left Key

Speaker

DC-jack

Stand

Reset Key

(behind the stand)

Note : Camera icon with "*" means it is well registered. You should select and pair with the

camera icon without "*" sign.

8.1 .1 ADD CAMERA

1. Press the MENU key then the menu will pop up;

2. Press the ◀ key or ▶ key until the camera icon is highlighted , then press ▲ key or

▼ key to select your desired camera;

3. Press OK key to enter into sub-menu;

4. Press ▲ key or ▼ key to select ADD CAM then press OK key;

5. While the appears on the LCD screen, unplug the camera power plug first, then press

and hold the PAIR button at the camera unit and re-plug the power plug at the same time

until the camera's power indicator flashes.

6. Once paired, “ appears”on the LCD screen.

7. If fails, repeat the above steps.

8.1.2 DELETE CAMERA

1. Press the MENU key and the menu will pop up;

2. Press the ◀ key or ▶ key until the camera icon is highlighted , then press ▲ key or

▼ key to select your desired camera;

3. Press OK key, to enter into sub-menu;

4. Press ▲ key or ▼ key to select DEL CAM then press OK key;

5. Press ▼ key to select key to delete the camera;

6. Press OK key to confirm the option.

8.2 VOLUME

1. Press the button and the menu bar will pop up.

2. Press the ◀ button or▶ button until is highlighted.

3. Press the ▲ button or ▼ button to select the desired volume level from level 1 ~ 5.

(The default volume level setting is level 2 and level 0 is OFF.)

8.3 TEMPERATURE UNIT SETTING

1. Press the MENU/OK key and the menu will pop up;

2. Press the ◀ key or ▶ key until the temperature icon is highlighted;

3. Press ▲ key or ▼ key to select between ℉ or ℃ ;

4. Press OK key to confirm;

5. Press the key to Exit.

Note: The detection range is 0~50 ℃ .

8.3.1 TEMPERATURE ALARM SETTING

1. Press ▲ / ▼ key to select then for alert setting.

2. Press ▲ / ▼ to select then followed by for confirming alarm on or then

followed by for switching off alarm function.

8.3.2 SET TEMPERATURE HI/LO ALERT LIMITS

1. When is highlighted at Alarm setting then press to enter Hi/Lo limits settings.

2. Press ▲ / ▼ keys to adjust the Hi limit then press to confirm.

设计

审核

审批

王勇

2019/03/28

3. Then the cursor will jump to Lo limit setting.

4. Press ▲ / ▼ keys to adjust the Lo limit then press to confirm.

To skip the setting edit, press key to exit to last menu level.

Note:The High temperature alarm range is 20-40 ℃, and the Low temperature alarm

range is 0-19 ℃. The high temperature alarm default setting is 36 ℃, and the low

temperature alarm default setting is 8 ℃. When the temperature goes above or below the

settings, the temperature icon turns red. It will flash to alert user by audio beeps. Press

any key on the parent unit to stop beeping and flashing.

8.4 LULLABY SETTING

You can soothe the baby to sleep by playing a gentle lullaby from the Camera unit.

1. Press the MENU key and the menu will pop up;

2. Press the ◀ key or ▶key until the lullaby icon is highlighted;

3. Press ▲ key or ▼ key to select one of the 8 available lullabies, you can pick single

playback, loop (all 8 lullabies) playback or stop ;

4. Press OK key to confirm.

Note : The lullaby default setting is OFF.

8.5 ALARM SETTING

You can use the Parent Unit to set an alarm as a reminder for you to take care of your baby.

If an alarm time is selected, the Parent Unit will beep at the end of the selected hour period

from 30min to 6hrs with 30min step interval. The alarm will sound for about 1 minute

when the time is reached, or can be stopped by pressing any button.

1. Press the MENU key and the menu will pop up.

2. Press the◀ / ▶ keys to select is highlighted..

3. Press the▲ / ▼ keys to select the expected timers.

4. Press OK key to confirm.

Note : The alarm default setting is OFF. When the alarm is ringing, press any key on the

parent unit to stop.

8.6 DISPLAY BRIGHTNESS

1. Press the button and the menu bar will pop up.

2. Press the ◀ or ▶ keys until is highlighted.

3. Press the ▲ or ▼ keys to select the desired brightness level from level 1 ~ 5.

(The default brightness level setting is level 3.)

8.7 VIDEO OFF TIMER SETTING

1. Press the button and the menu bar will pop up.

2. Press the ◀ or ▶ keys until is highlighted.

3. Press the ▲ or ▼ keys to select for the parent unit video to turn off after 5min,

15min or 30min if no buttons have been pressed.

4. The audio will remain on, and you can press any button to turn the video screen

back on.

Note: If there are multiple cameras in scan mode, the audio will switch about every 10

seconds.

11. MAINTENANCE

* Clean your baby monitor with a slightly damp or anti-static cloth.

* Never use cleaning agents or solvents.

No reception on the

monitor

Frozen Picture on

Screen

Audio feedback

(high pitched noise)

Interference or poor

recetion

* The power adapters may not be properly connected;

* Confirm that the camera and monitor are ON;

* Camera may be far away from the monitor;

* Camera and monitor may not be properly paired; follow PAIRING instructions;

* Move the monitor close to the camera;

* The camera or monitor may be placed too close to many metal objects;

* Other electronic devices may be interfering with the signal;

* The battery power may be too low;

* The camera and monitor may be too close together;

* The volume on the monitor may be set too high;

* Repower the baby unit (plug out the adapter, then plug it into the

socket again);

* Press the RESET key at the back of parent unit ( behind the

support stand )

10. TROUBLE SHOOTING

12. DISPOSAL GUIDE FOR BATTERY AND PRODUCT

At the end of the product's life cycle, you should not dispose of this product with normal

household waste. Take this product to a collection point for the recycling of electrical and

electronic equipment. The symbol on the Product, User's Guide and / or box indicates this.

Some of the product materials can be reused if you take them to a recycling point. By

reusing some parts or raw materials from used products you make an important

contribution to the protection of the environment.

Please contact your local authorities in case you need more information on the collection

points in your area.

Dispose of the battery pack in an environmentally-friendly manner according to your local

regulations.

FCC and IC regulations

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

FCC Caution:

Changes or modifications not expressly approved by the part responsible for compliance

could void the user's authority to operate the equipment.

FCC Statement:

"This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or tel evision reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

—Consult the dealer or an experienced radio/TV technician for help."

Industry Canada

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil

2.4GHz Digital Wireless Video Baby Monitor

User Manual

Ver: 1.3

Made in China

www.hellobaby.net.cn

Part No: C 20040203

ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.

This equipment complies with Industry Canada radiation exposure limits set forth for an

uncontrolled environment.

Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites

établies pour un environnement non contrôlé.

FCC/IC RF Radiation Exposure Statement Caution: This Transmitter must be installed to

provide a separation distance of at least 20 cm from all persons.

IC Radiation Déclaration d'exposition Attention: Cet émetteur doit être installé pour

fournir une distance de séparation d'au moins 20 cm de toute personne.

EU Declaration of Conformity (DoC)

Hereby, HelloBaby Technology (HK) Limited declares that the radio equipment type

(Digital Video Baby Monitor HB248) is in compliance with RED Directive 2014/53/EU.

The full text of the EU declaration of conformity is available on the website:

www.hellobaby.net.cn

Trade Name : Hellobaby

Model: HB248

Responsible Party: Startline LLC

Add: 22 Hazelwood Drive, Jericho, NY 11753

Tel: 1-516-681-3729

Shenzhen Videotimes Technology Co.,Ltd

Rm 601, 6/F, Tower B, United Financial Building, No.1

Shihua Road, Futian Free Trade Zone, Shenzhen, China

Improper or incorrect use of batteries may cause corrosion or battery leakage, which

could cause personal injury or damage to property.Use only the types of the batteries

which are indicated in this manual.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45 degree C or Incinerate.

Follow Manufacturer's Instructions.

Product tested against En62471

WARNING IR emitted from this product. Do not stare at operating lamp

Risk Group 1

Strangulation Hazard: Children have STRANGLED

in cords. Keep this cord out of the reach of children

(more than 3 ft (0.9 m) away). Do not remove this tag.

WARNING

DANGER D’ÉTRANGLEMENT: Des enfants se sont

ÉTRANGLÉS avec des cordons électriques. Garde

le cordonélectrique hors de la portée des enfants(à

plus de 0.9m/3 pi du lit d’enfant). Ne pas enlever

cette étiquette.

AVERTISSEMENT

9 10

Focus on Mom & Baby Care !

9. TECHNICAL DATA

2400~2483.5MHz

Frequency

Power Adaptor

Parent Unit: Input: 100-240VAC 50/60Hz

Output: 6VDC 600mA

Camera Unit: Input: 100-240VAC 50/60Hz

Output: 5V 1A)

Operation

environment

Up to 1000ft (300m) outdoor line of sight

Up to 165ft (50m) indoor

Operating Range

Display

2.4'' Diagonal TFT LCD

Battery (Parent Unit)

Battery Life

Li-ion 3.7V 950mAh (3.515Wh)

Up to 8 hours

Temperature : +32F- +104F( 0℃ -40℃ )

RelativeHumidity:15%-85%

Camera unit and parent

unit RF power ( for CE)

less than 20dBm

Summary of content (1 pages)

PAGE 1
英语说明书(HB248) 尺寸:540*120MM 设计说明书为折叠式料号：20040205C 颜色：彩色类型：环保版本：1.3 王勇 User Manual 2.4GHz Digital Wireless Video Baby Monitor Model: HB248 www.hellobaby.net.cn service@hellobaby.net.cn 3. Then the cursor will jump to Lo limit setting. 4. Press ▲ / ▼ keys to adjust the Lo limit then press to confirm. To skip the setting edit, press key to exit to last menu level. Note:The High temperature alarm range is 20-40 ℃, and the Low temperature alarm range is 0-19 ℃.