Manual

INSTALLATION INSTRUCTIONS

FRONT STABILIZER BAR

79-93 FORD MUSTANG V8 MODELS ONLY

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION

6709 ( R-6709) 03/26/07

559-734-7451 800-367-5480 FAX 559-734-7460

PAGE 1
559-734-7451 800-367-5480 FAX 559-734-7460 INSTALLATION INSTRUCTIONS FRONT STABILIZER BAR 79-93 FORD MUSTANG V8 MODELS ONLY Thank you for purchasing a quality Hellwig Product.
PAGE 2
559-734-7451 800-367-5480 FAX 559-734-7460 TORQUE TABLE BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs. SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES. NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST THE BAR, THE WEIGHT OF THE VEHICLE MUST BE ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLE BY THE FRAME. NOTE: THIS SWAY BAR IS DESIGNED TO REPLACE THE FACTORY MOUNTED SWAY BAR 1.