INSTALLATION INSTRUCTIONS Rear Stabilizer Bar Workhorse W20-W24 Models Thank you for purchasing a quality Hellwig Product.
PARTS LIST RSB # 7237 PART # QTY DESCRIPTION 20217219 1 1-3/4” SWAY BAR 20227219 111000570 111000571 111000572 1 4 2 2 1-3/4” CUT SWAY BAR 5/8” POLY BUSHING SMALL BUSHING SLEEVE LARGE BUSHING SLEEVE 20800161 1 CROSSMEMBER 72370 1 REAR SWAY BAR ISNTALL/KIT 111000889 20800173 20800174 20800172 20800787 20800889 20800307 20800040 20800039 125020066 2 1 1 2 2 2 4 1 1 1 101500622 107700622 101500125 107521044 102520043 101500138 107700058 102500137 135007237 7237 ( R-7237 ) COMPLETION KIT 4 4
TORQUE TABLE BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs. SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES. NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST BAR, THE WEIGHT OF THE VEHICLE MUST BE ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLE BY FRAME.
